DURALABEL PRO 300 WINDOWS 7 DRIVER

Make sure the tape is fed through the two guides at the cartridge exit. Finally my PC got up to speed! Other drivers most commonly associated with Graphic Products Duralabel Pro problems: Each spindle has a wider rim on one end, and a narrower end on the other side: Power was cycled too quickly. The label stock should roll forward, underneath the white roller, between the two movable guides at the back of the print head, through the green C-shaped sensor, and finally forward over the black rubber roller in front. Warranties The optional battery packs for the DuraLabel Toro and Lobo portable systems are warrantied for three years from the date of purchase.

Uploader:	Mezishura
Date Added:	11 September 2010
File Size:	67.70 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	78967
Price:	Free* [*Free Regsitration Required]

Right-click in the blank space on your desktop and choose Personalize in the menu. Dudalabel may even be no printing ribbon loaded. There is a green plastic latch that should catch it on each side.

Graphic Products Duralabel Pro 300 Driver Download

With the DLPyou can easily print signs and labels to withstand most any condition nature or industry can dole out. Then, try printing your label once more.

Place a cleaning swab between your forefinger and thumb and squeeze until it snaps. How durakabel Clean DuraLabel Bronco. Highlight and click on the Excel Spreadsheet page where your data is located, e. Turn the ribbon rewind knob on the cartridge counter-clockwise about a quarter of a turn, and try fitting the cartridge into place again. Check the Driver Settings Save your label design and close the design program. Each black plastic ribbon spindle has a wider rim on one end, and a narrower end on the other side: We offer free support for windoows lifetime of our printers, and free labeling advice and assistance for all of our customers.

Finally, it should reach over the dark gray rubber roller. After the label is cut, the light will change to solid green. If you still see the same print quality problems, please contact our support team for help.

DuraLabel PRO 300

The most common cause for this is a simple mechanical issue, which can be fixed in a matter of seconds. Then, set the Print Method to Thermal Transfer. Kingston Fcr-hs Driver Download Go to the Stock tab, and look at the Method drop-down menu. Apply the ribbon supply spindle to the rear hub, with the ribbon leader dropped down. Then, open your label design again and try printing it once more. Verify you are using the correct power supply. Page of 52 Go.

DuraLabel PRO Information | Graphic Products

Figures 7, 8, 9, 12, 13, 14 and 15 illustrate 4. Minimize any open windows until you can see the Toro home screen, and click on the printer icon in the taskbar.

Continuous a roll of uninterrupted label stock Black Mark a roll of pre-printed label stock, with duralsbel black mark on the backing between labels Die-Cut a roll of pre-cut labels, ready to peel off one by one If this setting was already correct, then click the Calibrate button to have Toro feed some of the label stock through and re-adjust its internal sensors.

Turn off the printer again, wait about five seconds, press and hold the button, and turn the system back on.

DuraLabel PRO « Official DuraLabel® Store | Graphic Products

Click OK to apply the change and close this window, reopen your label program and your label design, and try printing again. If you are still not able to print normally, please contact our support team for help. If you see the same error again, please contact our support team for help. duralavel

You can store the Templates and Furalabel folder in any convenient location on your computer. Upgrading A Driver Next. The supply cartridge may catch in the system during loading.

The printer has finished following the instructions that it received. Make sure that each ribbon spool is seated correctly; each spool has a notch on the end that will engage with a tab on the wheel that holds it.